Perle Systems IOLAN SCS - Manual (Page 241)

241
Settings
I/O UDP Settings
Configure the following parameters:
UDP Entry When enabled, broadcasts I/O status (data) to the specified range of IP
addresses.
Default: Disabled
Start IP Address The first host IP address in the range of IP addresses (for IPV4 or IPV6) that
the IOLAN will listen for messages from and/or send messages to.
Field Format: IPv4 or IPv6 address
End IP Address The last host IP address in the range of IP addresses (for IPV4, not required for
IPV6) that the IOLAN will listen for messages from and/or send messages to.
Field Format: IPv4 address
Port The UDP port that the IOLAN will use to relay messages to servers/hosts.
Default: 0 (zero)