Perle Systems IOLAN SCS - Manual (Page 299)

299
Management
Bootup Files Tab Field Descriptions
You must have a TFTP server running on any host that you are uploading or downloading files
to/from. When you specify the file path, the path must be relative to the default path set in your TFTP
server software.
Configure the following parameters:
Firmware Host The host name or IP address of the server that contains the firmware file. If you
use a host name, it must exist in the IOLAN’s host table or be resolved by
DNS.
Field Format: Resolvable host name, IPv4 address, IPv6 address
Firmware File The path and file name, relative to the default path of your TFTP server
software, of the update software for the IOLAN that will be loaded when the
IOLAN is rebooted.
Configuration Host The host name or IP address of the server that contains the configuration file. If
you use a host name, it must exist in the IOLAN’s host table or be resolved by
DNS.
Field Format: Resolvable host name, IPv4 address, IPv6 address
Configuration File The path and file name, relative to the default path of your TFTP server
software, of the configuration file for the IOLAN that will be loaded when the
IOLAN is rebooted.