Planet Technology SGSD-1022 - Manual (Page 123)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
123
Rate Limit Scale and 5 under Rate Limit Level.
4.4.5.2 Output Rate Limit Port Configuration
Use the rate limit configuration pages to apply output rate limiting.
Figure 4-4-9 Output Rate Limit Port Configuration page screenshot
3. Click Port, Rate Limit, Output Port Configuration.
4. Enable the Rate Limit Status for the required interfaces, set the Rate Limit Scale and Rate Limit Level, and click Apply.
The page includes the following fields:
Object Description
• Port/Trunk
Displays the port/trunk number
• Output Rate Limit
Status
Enables or disables the rate limit.
(Default: Enabled)
• Output Rate Limit
Scale/Level
Multiplied by one another, the scale and level set the rate limit.
For example, to limit port traffic to 500K bytes per second, choose 100K under
Rate Limit Scale and 5 under Rate Limit Level.