Planet Technology SGSD-1022 - Manual (Page 258)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
258
4.11.3 RADIUS Settings
This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screen in Figure 4-11-3
appears.
Figure 4-11-3 Authentication \ RADIUS Settings screenshot
The page includes the following fields:
Object Description
RADIUS Settings -Global Provides globally applicable RADIUS settings.
ServerIndex Specifies one of five RADIUS servers that may be configured. The Managed
Switch attempts authentication using the listed sequence of servers. The process
ends when a server either approves or denies access to a user.
Server IP Address Address of the RADIUS server.
Server Port Number Network (UDP) port of authentication server used for authentication messages.
Range: 1-65535;
Default: 1812
Secret Text String Encryption key used to authenticate logon access for client.
Do not use blank spaces in the string.
(Maximum length: 48 characters)
Number of Server
Transmits
Number of times the Managed Switch tries to authenticate logon access via the
authentication server.
Range: 1-30;
Default: 2
Timeout for a reply The number of seconds the Managed Switch waits for a reply from the RADIUS
server before it resends the request.
Range: 1-65535;
Default: 5