Planet Technology SGSD-1022 - Manual (Page 222)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
222
4.9.3.3 MVR Port Information
You can display information about the interfaces attached to the MVR VLAN.
Figure 4-9-13 Port Information page screenshot
The page includes the following fields:
Object Description
• Type Shows the MVR port type.
• Oper Status Shows the link status.
• MVR Status Shows the MVR status.
MVR status for source ports is “ACTIVE” if MVR is globally enabled on the
Managed Switch.
MVR status for receiver ports is “ACTIVE” only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has been
statically assigned to an interface.
• Immediate Leave
Shows if immediate leave is enabled or disabled.
• Trunk Member
Shows if port is a trunk member.
4.9.3.4 MVR Group Member Configuration
For multicast streams that will run for a long term and be associated with a stable set of hosts, you can statically bind the
multicast group to the participating interfaces.