Planet Technology SGSD-1022 - Manual (Page 629)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
629
Command Usage
You must configure an ACL before you can map a CoS queue to the rule.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#map access-list mac steve cos 0
Console(config-if)#
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp
Command Mode
Privileged Exec
Example
Console# show map ip dscp
dscp Mapping Status: Disabled
DSCP COS
-------- -------
0 1
1 0
2 0
3 0
.
61 0
62 0
63 0
Console#
Related Commands
map ip dscp
show map ip port
Use this command to show the IP port priority map.
Syntax