Planet Technology SGSD-1022 - Manual (Page 67)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
67
The page includes the following fields:
Object Description
• Name The name of a file stored on the switch.
• Type Indicates either an operation code file, or a configuration file.
• Startup Shows if this file is used when the system is started.
• Size The length of the file in bytes.
If you download to a new file name using "tftp to startup-config"," the file is automatically set as the start-up configuration file.
To use the new settings, reboot the system via the Reset page.
The file "Factory_Default_Config.cfg" can be copied to the TFTP server, but cannot be
used as the destination on the Managed Switch.