Planet Technology SGSD-1022 - Manual (Page 392)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
392
default.
Example
Console(config)#logging trap 4
Console(config)#
clear log
This command clears messages from the log buffer.
Syntax
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent memory).
ram - Event history stored in temporary RAM (i.e., memory flushed on power reset).
Default Setting
Flash and RAM
Command Mode
Privileged Exec
Example
Console#clear log
Console#
Related Commands
show logging
show logging
This command displays the configuration settings for logging messages to local switch memory, to an SMTP event handler, or to
a remote syslog server.
Syntax
show logging {flash | ram | sendmail | trap}
flash - Displays settings for storing event messages in flash memory (i.e., permanent memory).
ram - Displays settings for storing event messages in temporary RAM (i.e., memory flushed on power reset).
sendmail - Displays settings for the SMTP event handler (page 4-58).
trap - Displays settings for the trap function.
Default Setting