Planet Technology SGSD-1022 - Manual (Page 76)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
76
For example, using Level 7 will report all events from level 7 to level 0.
(Default: Level 7)
• SMTP Server List
Specifies a list of up to three recipient SMTP servers.
The Managed Switch attempts to connect to the other listed servers if the first
fails. Use the New SMTP Server text field and the Add/Remove buttons to
configure the list.
• Email Destination
Address List
Specifies the email recipients of alert messages. You can specify up to five
recipients. Use the New Email Destination Address text field and the
Add/Remove buttons to configure the list.
1. The Managed Switch doesn’t support DNS protocol, to make the SMTP alert receiver to
get the e-mail send by the Managed Switch; the correct SMTP Server’s IP address has
to be field in the Server List. Check the correct IP address of the Mail Server before
enter the field.
2. It is recommended to send a test e-mail to make sure you can receive the alert mails.
■ Example: SMTP Configuration Sample
In this SMTP example, the Mail server’s IP address is 220.128.188.248. The email account [email protected] is one of the
legal account in the mail domain, once there is a level 7 event occurred, the Managed Switch will send a alert email to
[email protected]
Figure 4-2-21 SMTP Configuration sample screenshot