Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 128)

1.12 Holding Features
128 Feature Guide
If the following occurs frequently with an SLT, choose " Mode 2 ", " Mode 3 ", or " Mode 4 ":
a) When an SLT user receives a call, reorder tone is heard or nobody answers the
call.
b) When an SLT user goes off-hook, reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these
problems, choose "
Mode 2 ", " Mode 3 ", or " Mode 4 ". Every call will be terminated unless
the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and
Mode 4.
• Hold Alarm tone pattern has a default. ( 4.2.1 Tones/Ring Tones). Tone pattern and
frequencies can be rearranged as desired through system programming; this is effective
for SLT users only.
User Manual References
User Manual
1.4.2 Holding a Call
Hold Transfer to Trunk Transfer to Extension
Mode 1
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 2
(Default)
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 3
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Extension No.
Mode 4
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.