Conditions, Feature guide references – Panasonic HYBRID IP-PBX KX-TDA200 User Manual
Page 50
1.2 Receiving Group Features
50
Feature Guide
2.
Busy on Busy
The Busy on Busy feature works when the destination for the Intercept Routing—Overflow
in an Incoming Call Distribution Group feature is not assigned in one of the following
conditions:
a)
There is no space in the Waiting queue.
b)
The Queuing Time Table is not assigned and there are no extensions logged-in.
[Example of a)]
When the answering agent number (
Maximum Number of Agents [632]) is "2", and the
queuing call number (
Queuing Call Capacity [628]) is "0":
There are five assistants in the shop. If two of them are engaged on the phone, the next
caller will hear busy tone to prevent the caller from thinking that there is no one in the shop
or that the shop is closed.
Conditions
[Intercept Routing—Overflow in an Incoming Call Distribution Group]
•
If the Overflow time expires, and the overflow destination is unavailable:
a)
If the trunk call arrives through the LCOT or T1 (LCOT/GCOT) card: (1) The line is
disconnected when the call was once in a queue and an outgoing message (OGM)
was sent to the call, or when the call reached an incoming call distribution group by
using the DISA feature (
1.15.6 Direct Inward System Access (DISA)). (2) Except
for the above, redirection is ignored and the Overflow timer activates again.
b)
If the call arrives through the other cards: Redirection is ignored and the Overflow
timer activates again.
[Busy on Busy]
•
If a trunk call arrives through the LCOT or T1 (LCOT/GCOT) card, busy tone will not be
sent to the caller.
Feature Guide References