Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 153)

1.16 Caller ID Features
Feature Guide 153
3. Number/Name Assignment
3.1 Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller’s number according to
preprogrammed tables. The modified number will be recorded for calling back.
The PBX supports a specified number of modification tables, and each trunk group
can select a table for use. Each table has ten locations for local/international call data
and one for long distance call data.
The PBX checks the local/international call data first. If a match is not found, the long
distance call data is applied.
[Example]
Note
When caller’s information is sent through an ISDN line and the call type is Subscriber,
National, or International, the following modification table is used instead of the above
table:
012
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance Call
Data 1
Area Code Removed No. of Digits Added No.
Trunk
Group No.
1
2
:
Modification
Table
1
3
:
Modification Table 1
00
:
Not
programmable
3
2
0
:
001
:
Blank
0
<Table Selection>
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
Removed No. of Digits Added No.
<Modification Table>
0
0
0
Blank
0
00