Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 199)

1.22 Voice Mail Features
Feature Guide 199
[Performance of Pressing the VM Transfer Button and Entering an Extension
Number]
[Example]
d) Listening to a Recorded Message
If the VPS receives a message, the VPS will set the Message Waiting feature (e.g.,
turning on the MESSAGE button light) on the corresponding telephone as notification.
(
1.17.1 Message Waiting) Thereby, the VPS notifies the extension user that there
is a message waiting in his mailbox. When the MESSAGE button light turns on,
pressing the button allows the extension user to play back the messages stored in his
mailbox without dialling such as a mailbox number. It is programmable whether the
PBX or the VPS cancels the Message Waiting feature (e.g., turning off the MESSAGE
button light). When the PBX is selected, the Message Waiting feature is cancelled
after the extension user has accessed the VPS. When the VPS is selected, the
Message Waiting feature is cancelled after the extension user has listened to
messages stored in his mailbox.
Transmitted Command
In AA Service Mode In VM Service Mode
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.]) Recording message command
(H [H = Mailbox No.])
Trunk Call
VM Port 1 VM Port 2
VM Port X VM Port 3
VM (DTMF)
Group
VPS (In AA service mode)
PBX
Extension
(Operator)
Transfer with VM Transfer
button + extension number (103)
Sent "#6" + "103".
Switching to VM command
mailbox number