Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 152)

1.16 Caller ID Features
152 Feature Guide
1.16 Caller ID Features
1.16.1 Caller ID
Description
The PBX receives caller’s information, such as the caller’s name and telephone number, on
trunks assigned to receive Caller ID. A display PT user can see the information.
The PBX can modify the received number according to preprogrammed tables so that he can
call back or memorise it. For example, if the area code is sent and it is not required to call, store
the area code in the table so that the area code is deleted automatically.
1. Features
Caller ID includes the following features:
2. Service Features
Feature Description Details in
Caller ID Caller’s information which is sent from
an analogue trunk.
The following Caller ID signalling types are
supported: FSK and DTMF. –
Calling Line
Identification
Presentation (CLIP) Caller’s information which is sent from
an ISDN line. • 1.19.1.2
Calling/
Connected Line
Identification
Presentation
(CLIP/COLP)
Automatic Number
Identification (ANI) Caller’s information which is sent from
an E1 or T1 line. • 1.20.1 E1 Line
Service
• 1.21.1 T1 Line
Service
Features Description Details in
Calling Line
Identification (CLI)
Distribution Directs a DIL/DID/DDI/MSN call to a CLI
destination if the caller’s identification (Caller
ID/CLIP/ANI) has been assigned to the Caller
ID Table. • 1.1.1.5 Calling
Line
Identification
(CLI)
Distribution
Incoming Call Log Caller’s information is automatically recorded
in the call log of the called extension. This
information is used for confirming the caller,
calling back the caller, and/or storing the
number and name in the Personal Speed
Dialling. • 1.16.2
Incoming Call
Log