Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 215)

1.23 Portable Station (PS) Features
Feature Guide 215
• Most of the extension data (e.g., extension number, extension name) of the wired
telephone is used for its PS as well. However, the PS has its own extension data for the
following:
Note
To change the setting of the extension data above, the setting for the wired telephone
or the PS must be changed individually. When changing the PS setting, use the PS’s
original extension number (not the main telephone’s extension number), if required.
• When the Wireless XDP Parallel Mode has been set, the following extension data for the
wired telephone is copied to the PBX extension data for the PS and the extension data
remains there even when the Wireless XDP Parallel Mode is cancelled.
• If the Personal Programme Clear is performed, the corresponding extension data for both
the wired telephone and the PS will be cleared. (
1.25.2 Personal Programme Clear)
• When a call arrives, both the wired telephone and the PS ring. However, in the following
cases only the person who made the setting will receive ringing:
Feature Guide References
1.7.1 Automatic Callback Busy (Camp-On)
– Executive Busy Override
– Whisper OHCA (
1.7.4.4 Whisper OHCA)
– CCBS ( 1.19.1.9 Completion of Calls to Busy Subscriber (CCBS))
– Preferred Line Assignment—Incoming ( 1.4.1.2 Line Preference—Incoming)
– Preferred Line Assignment—Outgoing ( 1.5.5.2 Line Preference—Outgoing)
– Hot Line Setting ( 1.6.1.6 Hot Line)
– Transfer Recall Destination for Call Transfer and Call Park*
– Display Language (
1.18.4 Display Information)
– ISDN Bearer Mode ( 1.19.1.1 Integrated Services Digital Network (ISDN)—
SUMMARY)
– Flexible Button Assignment ( 1.18.2 Flexible Buttons)
– Call Waiting Setting ( 1.1.3.3 Call Waiting)
– FWD/DND Setting ( 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
– Call Pickup Deny Setting ( 1.4.1.3 Call Pickup)
– Executive Busy Override Deny Setting
– Itemised Billing Code for ARS (
1.9.1 Automatic Route Selection (ARS))
– Transfer Recall Destination for Call Transfer and Call Park
– CLIP/COLP Number (
CLIP/COLP Number [606])
– CLIP/COLP Number Selection
– CLIR Setting
– COLR Setting
– Extension Personal Identification Number (PIN) (
Extension Personal
Identification Number (PIN) [005]) ( 1.25.1 Extension Personal Identification
Number (PIN))
– COS Programming ( Class of Service [602]) ( 2.2.1 Class of Service (COS))
– User Group ( User Group [603]) ( 2.2.2 Group)
– Automatic Callback Busy
– Transfer Recall, Hold Recall (
1.12.1 Call Hold), and Call Park Recall