Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 85)

1.6 Memory Dialling Features
Feature Guide 85
1.6.1.3 Last Number Redial
Description
Every extension automatically saves the last external telephone number dialled to allow the
same number to be dialled again.
Automatic Redial:
If Last Number Redial is performed in hands-free mode and the called party is busy, redialling
will be automatically repeated a preprogrammed number of times (
Automatic Redial Repeat
Times [205]) at preprogrammed intervals ( Automatic Redial Interval [206]). The Redial Call
No-answer Ring Duration time is programmable.
This feature is only available for PT users with the SP-PHONE button.
Outgoing Call Log:
The last ten dialled numbers are automatically stored at each extension. A display PT user can
redial easily any of the stored numbers.
Conditions
• The memorised telephone number is replaced by a new one.
• If any dialling operation is done or an incoming call is answered during Automatic Redial,
Automatic Redial is cancelled.
• Automatic Redial is not available for some countries/areas when using an analogue trunk.
• Interrupt Redial
When the called party or the seized trunk is busy, it is possible to press the REDIAL button
continuously until the called party or the trunk becomes idle. There is no need to go off-
hook, before pressing the REDIAL button.
• Storing the Call Log Information in Personal Speed Dialling
When storing the number and name into Personal Speed Dialling from the call log
information, the Idle Line Access number is automatically attached to the telephone
number. (
1.6.1.4 Speed Dialling—Personal/System)
User Manual References
User Manual
1.2.3 Redial
1.11.1 Using the Call Log