Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 162)

1.18 Proprietary Telephone (PT) Features
162 Feature Guide
[DSS Console]
TRANSFER
Used to transfer a call to another party.
Flexible CO (Trunk)
Used to make or receive a trunk call or can be reassigned to
a different Trunk Access button (Default: S-CO) or to
another feature button.
INTERCOM
Used to make or receive intercom calls.
AUTO ANS
(Auto Answer)/
MUTE Used to receive an incoming call in hands-free mode, or
used for microphone or handset mute during a
conversation. (Dual feature button)
VOICE CALL/
MUTE
Used to monitor an intercom call automatically (a hands-
free conversation is not possible). Also used for handset
microphone mute during a conversation.
AUTO DIAL/
STORE Used for System/Personal Speed Dialling and storing
programme changes.
CONF
(Conference) Used to establish a multiple-party conversation.
FWD/DND
Used to perform FWD or DND. (Dual feature button)
PAUSE
Used to insert a pause in a stored number. With an APT, it
is used as the PROGRAM button.
Soft
Used to select the item displayed on the bottom line of the
display.
SELECT
Used to select the displayed item or to call the displayed
number.
SHIFT Used to access the second level of Soft button items.
MODE Used to shift the display to access various features.
Button Usage
ANSWER
Used to answer an incoming call or place the current call on
hold and answer another call with one-touch.
RELEASE
Used to disconnect the line during or after a conversation or
to complete a Call Transfer.
Flexible CO (Trunk)
Used to make or receive a trunk call or can be reassigned to
a different trunk or to another feature button.
Flexible DSS (Direct Station
Selection)
Used to access an extension with one-touch. Every button
is programmed to correspond to an extension. DSS buttons
can also be reassigned to other features.
PF (Programmable Feature)
Used to access a preprogrammed feature with one-touch.
(no default)
Button Usage