Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 302)

3.1 Introduction
302 Feature Guide
3.1 Introduction
3.1.1 Introduction
These Programming Instructions are designed to serve as an overall system programming
reference for the Panasonic Hybrid IP-PBX. The PBX has a default setting. You can change
the default to meet your requirements. System programming controls the PBX features
described in this Feature Guide. It allows the PBX to be customised to the requirements. Only
one person can programme at a time. Another person trying to enter programming mode will
be rejected.
Ways to Programme
There are two programming methods:
• PC (Personal Computer) Programming
All system programming can be performed. PC programming is described in Section
3.2 PC Programming.
• PT (Proprietary Telephone) Programming
A subset of system programming can be performed. PT programming is described in
Section 3.3 PT Programming. The extension user can programme by entering 3 digits
programming numbers from the PT.
Password Security
A password is required to perform programming for security purposes. Do not disclose the
password. This will avoid unauthorised access and possible dial through fraud.
Warning to the Administrator regarding the system password
1. Please inform the customer of the importance of the password and the possible
dangers.
2. Please maintain the secrecy of the password. This will avoid unauthorised
access and possible dial through fraud.
3. Please change the password periodically.
4. We strongly recommend that a password of 10 digits is used for maximum
protection against hackers.
5. If the system password is forgotten, you can examine the backup of the system
programming.
• If you have a backup system data, you can find the password by loading the
backup system data onto the PC and check the password using the programming
tool. As for a backup system data, refer to Section 3.3.4 Hybrid IP-PBX
Maintenance in the Installation Manual.
• If you do not have a backup system data, you have to set the PBX to the factory
default and reprogramme it. Therefore, we recommend to save a backup system
data.