Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 117)

1.10 Conversation Features
Feature Guide 117
1.10.4 Headset Operation
Description
This PBX provides headset compatible PTs. A PT user can talk to another party without lifting
the handset.
For connection and operation, refer to the Operating Instructions for the headset.
This feature is also known as Handset/Headset Selection.
Conditions
• A headset is an option.
• If the headset mode is on, pressing the SP-PHONE button activates the headset, not the
built-in speaker.
• To set the headset mode on a DPT, use personal programming (Headset Operation) or
press the Headset button. To set headset mode on an APT, use the handset/headset
selector provided on the set and/or on the headset.
• Headset Button
A flexible button on a DPT can be customised as the Headset button. The Headset button
can be also assigned to a flexible button on an APT, but the button does not work.
• Answer/Release Button
A flexible button can be customised as an Answer button or a Release button. Such
buttons are useful for headset operation. It is possible to answer an incoming call by
pressing an Answer button. While hearing the Call Waiting tone during a conversation,
pressing an Answer button enables one to answer the second call by placing the current
call on hold. Pressing a Release button enables one to disconnect the line during or after
conversation, or to complete a Call Transfer.
• It is possible to switch the headset mode to the hands-free mode or vice versa during a
conversation by pressing the Headset button.
• Headset users cannot use the following features:
Feature Guide References
1.18.2 Flexible Buttons
User Manual References
User Manual
1.3.5 Using the ANSWER/RELEASE Button
1.4.8 Using the Headset (Headset Operation)
3.1.2 Settings on the Programming Mode
– Automatic Redial ( 1.6.1.3 Last Number Redial)
– Receiving the OHCA ( 1.7.4.3 Off-Hook Call Announcement (OHCA))
– Receiving the Whisper OHCA ( 1.7.4.4 Whisper OHCA)