Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 167)

1.18 Proprietary Telephone (PT) Features
Feature Guide 167
1.18.3 LED Indication
Description
The light (LED: Light Emitting Diode) of the Message/Ringer Lamp and following buttons (Line
Status Buttons and Corresponding Extension Status Button) show line conditions with a variety
of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, ICD Group
Corresponding Extension Status Button: DSS
1. Light Pattern of the Message/Ringer Lamp
• Incoming call from a trunk: Red flashing
• Incoming call from another extension: Green flashing
• Message(s) present (no incoming call): Red on
• No Message(s) present (no incoming call): Off
2. Light Pattern of the Line Status Buttons
Incoming Call
Distribution
Group Line
Status
Intercom
Line Status
Trunk Status
Line Status
Button:
Red on
Off
Green on
Light
Pattern
Slow green
flashing
Moderate
green
flashing
Rapid green
flashing
Slow red
flashing
S-CO G-CO L-CO INTERCOM ICD Group
Idle
This extension is using the line.
This extension is holding the line.
This extension is holding the line using Exclusive Hold
or using the line for an Unattended Conference.
Incoming
call/Privacy
Release
Incoming
call for
another
extension/
Another
extension
is using the
line/Another
extension
has the line
on Exclusive
Hold. Other
extensions
are using
all trunks
in the trunk
group.
Another
extension
is holding
the line.
Incoming call
– –
– – – –
This extension
is logged out
of the incoming
call distribution
group.
Rapid red
flashing Incoming call to the incoming call
distribution group in Ring
distribution method – –