Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 290)

2.3 System Data Control
290 Feature Guide
2.3.5 Flexible Numbering/Fixed Numbering
Description
To dial another extension user or to access PBX features, the access numbers (extension
numbers or feature numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialling or talking)
1. Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can
be customised for easy use (
Flexible Numbering [100]). The numbers must not conflict.
It is also possible to use default (Pattern 1 or Pattern 2) shown in the following table:
a) Extension Numbers (Extension Numbering Scheme -1 through 32): Up to four-
digit number including the extension numbering scheme (up to two-digit number
consisting of "0 through 9" ) + additional digits (up to two digits, default: two digits)
[Example]
If the number "3" as a 1st extension numbering scheme and the "2" as an additional
digit have been programmed, the extension number 300 through 399 are available.
b) Feature Numbers: Up to four-digit number consisting of "0 through 9", " ", and "#"
c) Other PBX Extension Numbers (Other PBX Extension Number [TIE] -1 through
16): Up to three-digit number consisting of "0 through 9", " ", and "#"
[Flexible Numbering Table (available while a dial tone is heard)]
Feature Default
Pattern 1
(with )
Pattern 2
(without )
Extension Numbering Scheme -1 1 1
Extension Numbering Scheme -2 2 2
Extension Numbering Scheme -3 3 None
Extension Numbering Scheme -4 4 None
Extension Numbering Scheme -5 5 None
Extension Numbering Scheme -6 6 None
Extension Numbering Scheme -7-32 None None
Operator Call 9 / 0 9 / 0
Idle Line Access (Local Access) 0 / 9 0 / 9
Trunk Group Access 8 8
TIE Line Access 7 None