Position as shown in figure 2–5 and, Figure 2–6, And lower media guides, as shown in – Printronix T3306 User Manual
Page 29: Figure 2–7
2–9
Setting Up the Printer
6.
Slide the media forward, until it extends beyond the printer front slot.
7.
Slide the adjustable guide so that it is slightly touching the edge of the
media. Do not turn the knurled nut on top of the guide.
8.
Lower the printhead, and engage the printhead latch. Rotate the latch
wing one half-turn clockwise, and snap the latch wing down to lock the
printhead into position.
NOTE: It may be necessary to feed several labels before proper alignment
of the media occurs.
Fan-Fold
To install fan-folded media, follow the instructions included with the fan fold
adapter kit.
Printhead
Latch Wing
Figure 2–6. Raising the Printhead
Upper Media Guide
Front Slot
Tear Bar
Adjustable Media
Guide
Media Hub
Bouncer
Rewind
Bracket
Figure 2–7. Routing the Media