The diagrams in, Figure 3–2, Selecting a menu option – Printronix T3306 User Manual
Page 51
3–7
Configuring the Printer
To configure the printer, it must be off line. If the ON LINE/PAUSE indicator is lit,
press and release the ON LINE key to place the printer off line. When the printer
is placed off line, OFF LINE appears in the message display.
Selecting a Menu Option
By default, the ENTER key is “locked” when the printer is turned on. The purpose
of this is to prevent accidental changes to the configuration values. If the ENTER
key is pressed when the key is locked, the message ENTER SWITCH LOCKED
will be displayed on the message display for one second, rather than selecting
the value.
Paper
Printer
Emulation
Maint/Misc
Config.
Page Width
Page Length
Ver. Image Shift
Hor. Image Shift
Auto Label Map
Print Mode
Ribbon Selection
Media Handling
Print Intensity
Print Speed
Gap Sensor
Ribbon Saver
Ppr. Feed Shift
IGP/PGL
Impact Printer
IGP/VGL
Power-Up State
Hex Dump Mode
PTX_SETUP Option
Load Config.
Save Config.
Print Config.
Delete Config.
Power-up Config.
Protect Configs.
(1) Depends on emulation installed
(1)
Module
Control
Dir. Listing
Delete File
Format Module
Print Directory
Module Info
Font Memory
Figure 3–2. User Configuration Menu Structure