Printronix T3306 User Manual
Page 57
3–13
Configuring the Printer
When processing is completed, the display shows:
Save Config.
X *
It is recommended that you print your configuration and store it in a safe place for
future reference. Refer to the “Printing a Configuration” section, on
for details.
Modifying a Saved Configuration
You can change a saved configuration by rewriting over it. For example, you can
modify Config. 1, shown below. Suppose you want to keep all the settings but
you want to select the parallel interface instead of the serial interface.
Config. 1:
Selects RS–232 Serial Interface
Selects Page Width of 4 inches
Selects Page Length of 24 inches
Selects image Horizontal Shift of 0.20 inches, etc.
1.
Load the configuration to be changed (for example, Config. 1).
a.
Press
ON LINE/
PAUSE
to take the printer off line.
OFF LINE
IMPACT PRINTER
b.
Press
for the following display:
USER CONFIG.
PAPER CONTROL
c.
Press
or
until the following displays:
OFF LINE
CONFIG. CONTROL