Printronix T3306 - Manual (Page 81)

3–37 Configuring the Printer
Serial Interface
Host Protocol
Values: NONE or XON/XOFF. This must be set to match your host
computer. The factory default is NONE.
XON means transmit on and XOFF means transmit off. In XON/XOFF protocol,
the printer sends ASCII code DC1 (Device Code 1, hex 11, XON) to the host
system when it is ready to receive more data (i.e., the printer is on line and the
data buffer is empty). The printer sends ASCII code DC3 (Device Code 3, hex
13, XOFF) when it is
not ready to receive data (i.e., the buffer is full or the printer
is off line).
Parallel
Host Interface
Parallel
Host
Protocol
Baud Rate Data Bits Stop Bits
Parity
DTR
Function
None *
XON/XOFF 300
600
1200
2400
4800
9600 *
19200 8 bits *
7 bits
6 bits
5 bits 1 bit *
2 bits
None *
Even
Odd Enable *
Disable
Press to view options.
Press to select an option.
Press to exit the configuration
menu.
= Factory Default
Figure 3–13. Host Serial Interface Menu