Printronix T3306 - Manual (Page 97)

3–53 Configuring the Printer
Option Parameter Comments
LPI 6 *
7
8
9
10
Can also be set by using the ^@L command.
Midline PY DISABLE*
ENABLE
When disabled, the Graphics mode Enabled command,
^PY, must be the first three characters of a line. When
enabled, the ^PY can occur anywhere in a line.
OffPage
Errors DISABLE *
ENABLE
Enable reports errors for elements that start or end be-
yond the right edge of the page; disable does not report
these errors.
Power-up ^F DISABLE *
ENABLE
Enable selects free format as the power-up default, and
selects the graphics mode (cc)PY as the power-up de-
fault. Free format causes the IGP/VGL to ignore carriage
returns, line feeds and all characters below 20 hex sent
from the host.
Power-up ^PY DISABLE *
ENABLE
Enable selects the graphics mode (cc)PY as the power-
up default.
Power-up ^X DISABLE *
ENABLE
Enable selects the ignore mode as the power-up default,
and selects the graphics mode (cc)PY as the power-up
default. All characters are ignored until a (cc)A command
is received.