Printronix T3306 - Manual (Page 72)

3–28 Configuring the Printer
NOTE: The Cutter, Self-Strip and Ribbon Saver options require that the
appropriate options be installed to operate correctly.
Print Intensity
This option specifies the level of thermal energy from the printhead to be used for
the type of paper and ribbon being used.
Larger numbers imply more heat (thermal energy) to be applied for each dot.
This has a significant effect on print quality. The print intensity and speed must
match the paper and ribbon type to obtain the best possible print quality and bar
code grades.
Print Speed
This option specifies the speed at which the paper will pass through the printer.
This parameter has a significant effect on print quality (refer to “Print Intensity”).
Gap Sensor
This option specifies whether either of the label gap sensors are enabled or
disabled.
Ribbon Saver
This option specifies whether the Ribbon Saver feature (when available) is
enabled or disabled.
Ppr Feed Shift
This menu represents the distance to advance a label when the tearoff, cutter or
Automatic Label Peel-Off Dispenser options are selected.