Printronix T3306 - Manual (Page 74)

3–30 Configuring the Printer
Emulation Menu Options
The LinePrinter+ emulation is the standard emulation on the printer. IGP/PGL
and IGP/VGL emulations are available as options.
The contents of the emulation menu structure will be created by the printer at
run-time, and, when powered up, the printer will automatically load the default
configuration values. The default set of parameters is the factory setting until a
new setting is saved to nonvolatile memory. Refer to the “Factory Settings”
section on
page 3–20 to restore the factory settings after you have created a new
default setting.
NOTE: Each emulation may have a unique set of configuration options in
addition to those that are in the printer system list. Refer to the
appropriate section at the end of this chapter for those settings.
Emulation
IGP/PGL
Impact
Printer
IGP/VGL
Press to view options.
Press to select an option.
Press to exit the configuration
menu.
Figure 3–9. Emulation Menu