Printronix T3306 - Manual (Page 87)

3–43 Configuring the Printer
Configuring IGP/PGL with the Control Panel
Matching certain printer operational settings to those of the host computer is
known as “printer configuration.” The settings, or configuration parameters,
such as selecting the host interface, are adjusted according to the printer
function key descriptions in this manual. Configure IGP/PGL in the same way
you would configure the printer for other features.
You can select IGP/PGL default parameters directly from the control panel as
explained in this chapter.
The IGP/PGL parameters are described on the following pages. Parameters
marked with an asterisk (*) indicate the default value. The printer must be
off-line to enter the configuration structure.
Pressing an invalid key to enter a parameter value may move you to another
level in the configuration or exit the configuration menu completely.
IMPORTANT
BEFORE you reconfigure IGP/PGL parameters, print a configuration
sheet to see all of the current settings.
Configure the IGP/PGL according to your specific requirements. Please note
that the Left Margin Sign option no longer exists in the IGP/PGL configuration
menu. To establish a signed left margin and a top/bottom margin, access the
option from the LP+ configuration menu.
The IGP/PGL sub-menu is shown on the following page.