Nlynx OMNITERM WBT 2.1.0E - Manual (Page 11)

Terminal Operation
Configure Another Printer Dialog Box
If you need to set up the second printer, select YES then click Next to repeat the
prior screens to setup another printer.
The default selection is NO. Click Next to finish.
Finish Dialog Box
Click Finish to apply your specified setting and quit the Setup Wizard.
Terminal Settings Change
The terminal must be restarted for changes to take effect. Click Restart to complete
the initial terminal setup.
To change the setup, press
F2 from the Terminal Manager screen (see section 2.2).
The Terminal Properties screens and procedures are described in Chapter 6.
8