Nlynx OMNITERM WBT 2.1.0E - Manual (Page 46)

Terminal Emulation Client Settings
Printer Settings Dialog Box (TN5250)
Printer Port:
The default value is LPT1.
Printer Type:
Select the desired printer from the scroll list and the default is IBM Graphics
Printer.
Transparent Mode Sequences:
Enter the specific value or the default will be used as followed.
Lead Code1:
6A End Code1: 5B
Lead Code2: 79 End Code2: 00
If the values of lead and end codes are ‘00’, this feature will be disabled.
Below is an example illustrating the transparent mode feature; ‘|¬’ are the lead
codes and ‘$’ is the end code:
Given the character string
|¬1B410C$ (Hex 6A 5F F1H C2H F4H F1H F0H C3H 5BH)
The printer emulation program will automatically remove the
Lead codes |¬ and End code $
And pack every two bytes of the remaining characters into one byte
Remaining characters 1B410C (Hex F1 C2 F4 F1 F0 C3)
Packed Hex 1B 41 0C
And then send those bytes (Hex 1B 41 0C) to the printer.
Advanced:
Click Advanced to display/Edit the printer EDCDIC-ASCII table.
43