Nlynx OMNITERM WBT 2.1.0E - Manual (Page 43)

Terminal Emulation Client Settings
Host Settings Dialog Box (TN5250 Printer Session)
Host Name/Address:
Enter the fully qualified Domain name or static IP address.
Port Number:
Enter TCP/IP port for Telnet on your host. The default value is port 23.
Device Name:
The host device name. A blank entry will cause the host to create a virtual
device name. This name must be unique.
Message Queue:
The default value is QSYSOPR. (Activated only in TN5250 Printer mode)
Library:
The default value is *LIBL. (Activated only in TN5250 Printer mode)
Font:
The default value is 011. (Activated only in TN5250 Printer mode)
Form Feed:
The default value is CONT. (Activated only in TN5250 Printer mode)
Local Echo:
This function is activated only when an ASCII session is selected.
Host Print Transform:
Click this check box to use the Host Print Transform dialog box (See below).
This function is activated only when TN5250 Printer mode is selected.
40