Nlynx OMNITERM WBT 2.1.0E - Manual (Page 124)

AutoUpdate / AutoConfiguration
Options 200 through 205 are Terminal Server connection options (RDP &
ICA):
Remote servers: Enter host name or IP address for the terminal servers. The
entry format is as follows:
<RDP:name1,name2\host;ICA:name1,name2\host address>
-or
-<
RDP:*\host;ICA:*\host address>
where:
"host" can be the IP address or host name.
"name" is the session name in the Terminal Manager of the OmniTerm
"RDP:" and "ICA:" identify the connection type
Examples:
1. 192.168.1.1
all ICA and RDP session will connect to 192.168.1.1
2. <RDP:*;ICA:*>192.168.1.1
all ICA/RDP sessions connect to 192.168.1.1
3. <RDP:rdp1,rdp2\192.168.1.1;ICA:ica1,ica2\192.168.1.3>
RDP session rdp1,rdp2 connect to 192.168.1.1, ICA session
ica1, ica2 connect to 192.168.1.3
4. <RDP:*;ICA:*\192.168.1.3>192.168.1.1
all RDP session connect to 192.168.1.1 and all ICA session connect to
192.168.1.3
5. <ICA:*>192.168.1.3
all ICA session connect to 192.168.1.3
User Name: Automatic Logon user name.
Domain: Automatic Logon domain name.
Password: Automatic Logon password.
Command Line: Application to run
Working Directory: The working directory for the application.
Important Note:
The extended option numbers described above may be redefined in the Terminal Properties screen,
Network tab, using the Advanced DHCP button. This is not recommended for options 206-209
because it will disable autoconfig of default devices.
121