Nlynx OMNITERM WBT 2.1.0E - Manual (Page 119)

Wireless Network Configuration
From within the Wireless Network tab, you can select an access point to
associate with, if the SSID broadcast is enabled on your Access Points. If SSID
broadcast is not enabled, click the Add button under the
Preferred Networks
section.
Wireless Networks tab
From within the
Wireless Network tab, you can specify the type of wireless
network in your environment. Businesses normally only use Access Point based
networks. The default setting “Any available network (access point preferred)” is
sufficient for most applications. You can specify“Access point (infrastructure)
networks only” to add a layer of additional security if desired. The option
“Automatically connect to non-preferred networks” is only used in a roaming
application with all Access Point security disabled. When complete, click the Close
button to save your settings.
Advanced Network Panel
116