Nlynx OMNITERM WBT 2.1.0E - Manual (Page 50)

Terminal Properties
6.1 - General Tab
This
General property sheet displays information that includes the name of the
product and information about the current software.
To reset the terminal properties to their factory-default settings, click the check box
and press Enter. The second time in sequence this is done, all connection settings (if
any) will be cleared and the initial Terminal Setup sequence will be invoked (see
Chapter 2).
A Serial Number may be displayed below the Bootlloader display. Serial No. is
displayed when that value was manually entered or loaded at the factory (units
shipped 3
rd Quarter of 2002 or later). The serial number along with other asset
related information is displayed and stored in SNMPADM management software
V2.0B1.81 or later.
Note: The Serial Number can be manually added/edited from this screen:
- Press Alt+Ctrl+Shift(left)+Space keys.
- Dialogue Box requests entry of a Serial Number
- Serial Number will display in General Tab
47