Nlynx OMNITERM WBT 2.1.0E - Manual (Page 120)

Wireless Network Configuration
From within the Wireless Network Properties screen you can specify your
SSID, WEP and 802.1x settings. If you use WEP and specify your WEP settings
manually, un-select the check box
“The key is provided automatically” then
lick the Modify WEP Key button.
The
WEP Enabled setting on this panel is set automatically based on the WEP
setting detected on your Access Point. If WEP is enabled on your access point, the
WEP Enabled option is checked, and is not checked if it is disabled.
Wireless Network Properties
At the
Wireless (WEP) Key Settings panel, enter the WEP key(s) used within
your network. The key settings can be entered as hex or ASCII characters and
accept values of 40 or 104 bits.
Wireless (WEP) Key settings
117