Nlynx OMNITERM WBT 2.1.0E - Manual (Page 42)

Terminal Emulation Client Settings
Host Settings Dialog Box (Display Sessions)
Host Name/Address:
Enter the fully qualified Domain name or static IP address.
Port Number:
Enter TCP/IP port for Telnet on your host. The default value is port 23.
Device Name:
The host device name. A blank entry will cause the host to create a virtual
device name. This name must be unique.
Multiple names may be entered using comma separators; e.g.
NAME1,NAME2,NAME3. During connection, if a name is already in use,
the next name in sequence is used. Up to five names may be specified.
Local Echo (ASCII session only)
Check to enable Local Echo.
39