Nlynx OMNITERM WBT 2.1.0E - Manual (Page 28)

ICA Client Settings
3.2 - Dial-In Connection
Dial-In Device Dialog Box
From the Dial-In Device scroll list, select one of the following:
A Modem connection such as Hayes Compatible on Com2.
A Serial connection such as Serial Cable on Com2.
Enter the area code, the phone number, and the country code in the appropriate
fields.
Click on
Configure to use the Device Properties dialog box. The Device
Properties dialog box contains two options:
Port Settings
Call Options
These options are discussed in Port Settings (3.2.1) and Call Options (3.2.2)
sections of this manual.
Click
Next to continue (see ICA Connection and following dialogs described in
section 3.1) or Finish to end.
If you clicked
Finish, and the following message displays, some setup information
needs to be entered for ICA Dial-in connection. Click OK to continue the setup of
ICA dial-in connection.
When you finish with the ICA configuration, the Terminal Manager displays the new
ICA connection name.
25