Nlynx OMNITERM WBT 2.1.0E - Manual (Page 75)

Terminal Properties
Network:
To configure a wireless connection on an OmniTerm, double click CISCO and
refer to Chapter 10 for detailed procedures.
To review/change the built in Ethernet network settings, double click the icon
labled PCI-xxxxxxx. To start other connections, double click the appropriate
icon.
When multiple connections exist, you can use the Advanced Settings under the
Advanced menu to set the order in which the connections are accessed by
network services.
To create a new network connection, double click Make New
Connection.
72