Nlynx OMNITERM WBT 2.1.0E - Manual (Page 67)

Terminal Properties
Calibrate:
When the Calibrate button is active you can click it to calibrate the touch
sensitivity and screen extent. You will get a screen with crosshairs in the lower
left that you will touch for calibration, then touch the crosshairs in the upper
right. After you are finished touch the "Done" button that appears in the
Calibrate Complete screen.
Touch Settings:
Touch Mode
Desktop - Button press and Drag & Drop enabled (Default)
Drawing - Disable Button Press; enable Drag & Drop
Button - Enable Button Press; disable Drag & Drop
64