Nlynx ETU400 - Manual (Page 108)

ETU400 User Guide 011603 9-4
signed on.
Each device you transfer from must be powered on,
have emulation loaded, and be at the AS/400 sign-
on screen.
NOTE: This parameter must be changed from
*REQUESTER when you run the PWRTO3XB command in
batch mode.
When you transfer the files to the host, you can specify how you want the
file stored:
• In one physical file with multiple members;
• In one physical file with one member (data is stored together);
• In multiple physical files with one member each.
• To store the files in one physical file with multiple members,
specify the following:
TOFILE Enter a file name.
Member name *MULTI
The member names will be the same as the device names
from which the file was transferred.
To store the files in one physical file with a single member, specify the
following parameters as shown:
TOFILE Enter a file name.
Member name *FILE
The name of the file and member will be the same as you
specify in the TOFILE file parameter, or you can
specify a separate member name.
To store the files in multiple physical files with a single member in
each:
TOFILE *MULTI
Member name *FILE
The file and member names are the same as the device
names from which the file was transferred. For example,
if you transfer a file from a micro with the device
name PRT2AD3, the file and member are both named
PRT2AD3.
You must specify Data Description Specifications when
you request *MULTI in the TOFILE parameter.