Nlynx ETU400 - Manual (Page 196)

ETU400 User Guide 011603 A-5
EDTUDF Example
In this example, you will add the ETU utility EDTUDF to the ETU Main
menu. Define the menu option so that you are prompted for parameters each
time you call the option from the menu so it displays only on your own
menu, and appears on your menu as Edit User-defined Functions.
1. Enter the EDTUDF command on the AS/400 command line.
edtudf
2. Press F4 to prompt for the parameters.
The Enter User Profile screen displays.
3. Since you are adding this menu option only to your own menu, use the
default *USER.
Press ENTER.
The Edit User Defined Function screen displays.
4. At the Description prompt, enter the name of the option as you want it
to appear on the menu (including UPPER and lower case characters):
Edit User-defined Functions
5. At the Functions prompt, enter the name of the command you are adding
to the menu:
edtudf
6. At the Mode prompt, enter:
*pmt
If you had entered *exe, the EDTUDF prompt screen would have displayed
and you would have been expected to define the request as you would
have liked it to execute each time the option is chosen from the menu.
7. Press Enter to add the user-defined function.
8. Press F3 to end the command and return to the Main ETU menu.
For more information on EDTUDF, see Chapter 10, ETU Command Reference.