Nlynx ETU400 - Manual (Page 66)

ETU400 User Guide 011603 5-6
TO3XB Example
In this example, you will transfer a file on your PC to a new host
physical file. The file on the PC is called c:\sales\january\week1.sal.
The host physical file is called JANSAL1 in a member called REG1. To
define the host file, use the existing host file definition (DDS)
contained in member SALE in the source physical file QDDSSRC. Use the
translation type *BASICS.
1. Choose option 4 from the ETU Main menu. The TO3XB screen displays.
2. Enter the host file name at the File name prompt:
jansal
3. Enter the host member name at the Member name prompt:
reg1
4. Use the default, *DATA, for the File type because the host file being
created with this command is a physical file.
5. Use the translation type that translates BASIC Sequential files. At
the Type of translate prompt, enter:
*basics
6. Use the translation table member that translates fixed-length records
from ASCII to EBCDIC. Use the default for Translation table file name.
For the translation table member, enter:
atoe1
7. Enter the name of the source file and member that contain the file
definition for the new file.
At the FFD or F & I prompt, enter:
qddssrc
At the member prompt, enter:
sale
8. Enter the microcomputer file name at the Qualified file name prompt:
c:\sales\january\report1.doc
9. Once you have entered the appropriate information, press ENTER to
start the command. ETU will transfer the data to the host and translate
it as you specified.