Nlynx ETU400 - Manual (Page 146)

ETU400 User Guide 011603 10-16
PGMFROM3XB Command
Parameter description Parameter name Parameter values
Qualified file name QFNAME micro file name
Program PGM host program name
Library name *LIBL
library name
Display status message? DSPSTSMSG *YES or *NO
Target release level TGTRLS *CURRENT
see SAVOBJ
command for other
parameters
The PGMFROM3XB command transfers a host executable program from the
AS/400 to a specified file on the micro. Do not use this command for
transferring program source code. Transfer source code with the FROM3XB,
PWRFROM3XB, TO3XB, or PWRTO3XB command.
NOTE: To use this command, you must be signed on as a security
officer, or be authorized to execute the program QSCMATPG.
QFNAME1 The name of the micro file to contain the AS/400 program. For
additional information, see About Microcomputer Files, in
Chapter 3.
PGM The qualified name of the AS/400 executable program to be
transferred to the micro.
Library The library containing the program. The default is
*LIBL.
DSPSTSMSG Displays program status messages during the execution of the
command. The default is *YES. To turn the messages off, enter
*NO.
TGTRLS The OS/400 release level of the target AS/400. To be used
when transferring a program between AS/400s having differing
versions of OS/400.
The syntax for entering the target release level differs from
one OS/400 release level to another. You can obtain the
syntax for the target release level of the AS/400 you're
transferring the program to by running the SAVOBJ command. To
access the SAVOBJ command, press F10 from when prompting the
PGMFROM3XB command.