Nlynx ETU400 - Manual (Page 275)

ETU400 User Guide 011603 G-5
Running ETU in System/36 Mode
Once you have signed on to the AS/400, you may execute an ETU procedure
in the following ways:
• Prompt an ETU procedure by selecting a menu item from the ETU36
menu. To display the ETU 36 menu, type:
MENU ETU36, your ETU library name
• Prompt an ETU procedure by entering “ETU36 procedure”, where
procedure is the ETU procedure (such as ALLOCATE, FILETOPC,
LIBRFRPC) to be executed. For example:
etu36 allocate
• Include in an OCL procedure.
Native Commands Not Supported in the System/36 Mode
The System/36 mode of ETU/400 does not support the following ETU native-
mode commands and utilities:
EDITTABLE, EDTUDF, PCFROMPC, PCTOPC, PWRFROM3XB, PWRTO3XB, SBMBATXFER,
SBMSCHJOB, STRSEU, VWSAVRQS.
System/36-mode Commands and Native Mode Equivalents
The System/36-mode ETU commands and their equivalent commands in native
mode are listed below in Table G-1.
Table G-1 ETU’s System/36-mode commands and their native mode equivalents
System/36-mode commands
Their native mode equivalents
ALLOCATE ALOCATB
DELETE DELETEB
COMPILE STRSEU
FILEFRPC TO3XB
FILETOPC FROM3XB
LIBRFRPC PGMTO3XB
LIBRTOPC PGMFROM3XB
PRNTFRMPC PRTTO3X
PRNTTOPC PRTFROM3X
RENAME RENAMEB
TESTFILE TESTB
XLT36FIL XLATETO
XLT36PRT PRTTOPC
XLTPCFIL XLATEFROM
XLTPCPRT PRTXFRMPC