Nlynx ETU400 - Manual (Page 300)

ETU400 User Guide 011603 G-30
mode (optional) specifies whether the target translation
file is to be created by this procedure, or if an
existing file is to be changed. Specify CREATE to
create a new file with the name specified in the
parameter “AS/400 label2”. Specify ADD to add the print
reports to the existing file “AS/400 label2”. The
default value is CREATE.
AS/400 label2 is the label (name) of the file to receive the
translated data.
file size (optional) is the number of records in the temporary
work file used in the translation process. The default
value is 1000.
date-2 (optional) is the date of the AS/400 file to be added
to “AS/400 label2”.
retain (optional) is the file retention (how long the file is
to exist) for the translated “AS/400 label2”. Allowed
values are T or J. Specifying T will result in the file
existing indefinitely (until specifically deleted), and
specifying J will result in the file being
automatically deleted at the end of the current AS/400
job. The default value is T.
from window {optional) is the print column position of the
report(s) on which to start translation. Any number
from 1 to 198 is valid. The default is 1.
to window (optional) is the print column position of the
report(s) on which to end translation. Any number from
1 to 198 is valid (it must be equal to or larger than
the number specified in “from window”). The default
value is 132.