RGB Spectrum Quadra User's Guide - Manual (Page 10)

I N T R O D U C T I O N
In This Guide
350-7951 Quadra User’s Guide 2
.
. .
.
.
A command line interface provides easy access to all Quadra functions. This
interface is supported remotely by either RS-232 serial communications or by
network control (Ethernet 10/100 BaseT).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I N T H I S G U I D E
The following chapters are included in the Quadra User’s Guide:
• Chapter 1, “ Introduction ” outlines the guide, describes Quadra’s
system features, and discusses inputs, outputs and scan rates.
• Chapter 2, “ Installation and Setup ” discusses system components,
provides front and rear panel diagrams, and provides instructions for
system installation, communications setup and timing.
• Chapter 3, “ Operations ” provides operating instructions for a variety
of frequently-used Quadra features.
• Chapter 4, “ Command Line Interface ” discusses command format
and syntax, and provides comprehensive tables of all control
commands — arranged according to category.
• Appendix A, “ Image Concepts ” discusses the basics of image size,
position and aspect ration, along with the important concepts of source
and destination rectangles.
• Appendix B, “ Communications Setup ” provides information about
specific communications setup procedures such as IP addresses.
• Appendix C, “ Connector Types ” provides technical information
about Quadra’s signal and control connectors.
• Appendix D, “ Firmware Upgrades and Troubleshooting ” provides
instructions for updating the system firmware, along with several
system troubleshooting procedures.
• Appendix E, “ Technical Specifications ” provides system technical
specifications plus information on data storage parameters.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Y S T E M F E A T U R E S
The Quadra includes the following standard features and functions:
• Flexible input channels — As standard, each input channel accepts
NTSC/PAL composite, S-Video, YP
b
P
r
component (HDTV) or high-
resolution RGB signals. Optionally, a digital input module (DVI
format) is available for each channel. Full 24-bit color processing is
used throughout the system.
Note HDTV (High Definition Television) input signals can be
processed through a channel’s RGB/YP
b
P
r
connector.