RGB Spectrum Quadra User's Guide - Manual (Page 84)

C O M M A N D L I N E I N T E R F A C E
Command Summary
350-7951 Quadra User’s Guide 76
.
. .
.
.
SETTINGSEXPORT [TIMING | WINDOW |
SYSTEM | ALL]
[filename] This command enables you to store Quadra
settings on an external computer. This is useful in
backing up settings, or providing the ability to
“clone” the settings on multiple
Quadra devices.
Storing this data is a two step process:
• Create a text file named “export.txt”
that is stored in
Quadra memory .
• Upload this file to your PC.
Please note the following important rules:
• You can specify your own filename
using the optional filename argument.
•
To save timing, window (display) and
system parameters together, use the
ALL option. Issuing the command
without an argument also accomplishes
this.
• Alternatively you can save just the
individual
TIMING , WINDOW or
SYSTEM parameters.
• To save only the user defined timing
values, use the
TIMING argument.
• If you wish to save only the window
preset parameters for each active
window preset, use the
WINDOW
argument.
If you wish to save only the system parameters for
the current system settings, use the
SYSTEM
argument. Note that this does not include the
settings saved in the
SAVECONFIGguration
register.
Use the following procedure to save your settings:
• Create the file using the
SETTINGSEXPORT command from
the Telnet or serial port.
• Log in to the FTP server in Quadra .
• Enter the user name “ rgb ” (lower case)
and the password “ spectrum .”
• Use the FTP command “get export.txt”
to move the file from
Quadra to your
PC.
• Type “close” to log off the FTP server.
See also: SETTINGSIMPORT .
Table 4-15. MIscellaneous Commands Descriptions(Continued)
Command Arguments Description