RGB Spectrum Quadra User's Guide - Manual (Page 55)

O P E R A T I O N S
Adjusting Hue and Saturation
350-7951 Quadra User’s Guide 47
.
. .
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A D J U S T IN G H U E A N D S A T U R A T IO N
Quadra enables you to easily adjust a source image’s hue and saturation using
the
HUE and SATuration commands.
1. Request help text for the HUE command. Type:
H HUE Enter
Figure 3-19. Help Text — Hue Command
2. Query the source’s current hue. Type:
HUE <input #> Enter
3. Adjust the hue as desired, from -180 to +180 (degrees). Type:
HUE <input #> [hue value] Enter
4. Request help text for the SATuration command. Type:
H SAT Enter
Figure 3-20. Help Text — Saturation Command
5. Query the source’s current color saturation. Type:
SAT <input #> Enter
6. Adjust the color saturation as desired, from 0 to 200. Type:
SAT <input #> [saturation value] Enter
Note that a saturation of 0 (zero) is a full monochrome image.