RGB Spectrum Quadra User's Guide - Manual (Page 127)

TE C H N I C A L S P E C I F I C A T I O N S
General Specifications
350-7951 Quadra User’s Guide 119
.
. .
.
.
IMAGE CONTROL
. . . . . . . . . SPECIFICATIONS
The table below lists image control specifications:
CONTROL
. . . . . . . . . SPECIFICATIONS
The table below lists Quadra control specifications:
Table E-7. Image Control Specifications
Parameter Specification
Size The size of each image can be scaled from thumbnail up to full screen.
Position Images may be positioned to an accuracy of one pixel horizontally and one
line vertically. An image can be moved to any region of the display space,
and if a portion is positioned off the screen, it is clipped.
Zoom, Pan Maximum Zoom range 32:1. Fully Pan within a zoomed image.
Other Functions Video source select, freeze frame, brightness and contrast, hue and
saturation.
Table E-8. Control Specifications
Parameter Specification
Control Protocol Quadra control is accomplished by use of the Quadra ASCII based
command set. This command set may be used with any of the control ports
listed below.
Ethernet 10/100 BASE-T ethernet port. Supports control of the full set of Quadra
commands over a network connection using a Telnet server/client
architecture.
RS-232 Port Quadra commands can be sent through the RS-232 port to control the
system.
•
The RS-232 port transfers commands using the asynchronous
serial protocol at 115200, 57600, 38400, 19200 or 9600 baud.
• The port is configured as DCE and can handle full duplex
transfer.
• Support for hardware and software handshaking is provided.
• The Quadra RS-232 port connector type is a 9-pin sub
miniature D connector.